GAMMA型剑杆织机织造双面牛仔织物的体会  

Experience of Producing Reversible Denim Fabric on GAMMA Rapier

作　　者：张清长 牛国栋 马延涛 李正旺 

机构地区：[1]山东如意科技集团澳泰纺织有限公司

出　　处：《棉纺织技术》2010年第4期55-57,共3页Cotton Textile Technology

摘　　要：探讨在GAMMA型剑杆织机上生产双面牛仔织物的关键工艺和技术措施。针对在GAMMA型剑杆织机上生产双面牛仔织物时存在断经多、上机速度慢、织机效率低的问题,通过优化上浆时的渗透压和被覆压等工艺参数,调整后梁高度、停经架倾斜度、上机张力等工艺参数,并设定两种综框高度,可使织机效率提高到90%,A+布率由不足80%提高到90%以上。Key processing and technology measures in producing reversible denim fabric on GAMMA rapier were discussed. According to the problems such as too many broken warp, slower looming speed and lower loom efficiency, processing parameters of penetrationpressure and covering pressure were optimized, processing parameters of back beam height, stop frame inclination, loom tension were adjusted, two kinds of heald height were set, finally loom efficiency could be increased to 90% ,A＇ fabric rate could be increased from less 80% to above 90%.

关 键 词：剑杆织机 双面织物 牛仔织物 后梁高度 停经架 上机张力 综框高度 

分 类 号：TS105.43[轻工技术与工程—纺织工程]