臭氧/生物法处理制药废水  

Ozone/Biological Technology for Pharmaceutical Wastewater Treatment

作　　者：戴启洲[1] 蔡少卿[1] 王家德[1] 陈建孟[1] 蒲通 

机构地区：[1]浙江工业大学生物与环境工程学院,浙江杭州310032 [2]浙江车头制药有限公司,浙江台州317321

出　　处：《中国给水排水》2010年第10期122-125,共4页China Water & Wastewater

摘　　要：针对制药废水的水质特点,通过臭氧预处理将制药中间体大分子氧化为小分子后,采用絮凝沉淀/兼氧—好氧生物处理工艺,可取得良好的处理效果。介绍了废水处理系统的组成、各个处理单元的设计参数及运行操作方式。调试运行结果显示,出水水质可达到《污水综合排放标准》(GB8978—1996)的一级标准。Considering the characteristics of the pharmaceutical wastewater, the ozone pretreatmerit is first used to oxidize the intermediate with larger molecule into matters with smaller molecule, and then the combined process of floeculation, sedimentation, facuhative anaerobic treatment and aerobic treatment can achieve excellent treatment effect. The composition of wastewater treatment system, the design parameters and operation modes of each treatment unit are introduced. The operation results show that the effluent quality can reach the first class criteria specified in the Integrated Wastewater Discharge Standard （GB 8978 - 1996）.

关 键 词：制药废水 臭氧预处理 生物处理 

分 类 号：X703.1[环境科学与工程—环境工程]