基于Pro/E和ANSYS的硬岩掘进机截割机构的有限元分析  

Finite element analysis (FEA) of cutting mechanism of hard rock roadheader based on Pro/E and ANSYS

作　　者：李晓豁[1] 王丹[1] 宋波[1] 何洋[1] 

机构地区：[1]辽宁工程技术大学机械学院,辽宁阜新123000

出　　处：《中国矿业》2010年第5期114-116,共3页China Mining Magazine

基　　金：国家自然科学基金资助项目(59774033);国家煤矿安全监察局安全生产科技发展指导性计项目(05-082);辽宁省教育厅创新团队项目(2007T0683);辽省省大型工矿装备实验研究中心(辽宁省高校重点实验室)开放基资助项目(07-61);辽宁省大型工矿装备重点实验室(辽宁省第二批科学技术计划项目;2008403010)

摘　　要：为了研究硬岩掘进机截割机构在外载荷作用下的应力应变特性,应用Pro/E软件对某型掘进机截割机构进行建模,利用接口将模型导入ANSYS,进行网格划分,建立有限元模型。通过某型硬岩掘进机进行有限元分析表明,当截割f=14的岩石时,该机截割机构的最大变形量为2.7mm,位于截割头前端,最大应力为248MPa,发生在悬臂升降油缸的销孔处。所得结论为改进硬岩掘进机截割机构、改善其受力状况和工作性能、延长使用寿命提供了依据。In order to study the stress and strain characteristics of a cutting mechanism of a hard rock roadheader under the effect of external loads,Pro/E software is applied for building model of the cutting mechanism of roadheader.The complete model is imported to ANSYS through the interface to build finite element model（FEM） by areas mesh.The FEA analysis of the certain type hard rock roadheader when cutting the rocks for the value of f is 14 shows that the maximum deformation of the cutting mechanism takes place in front of cutting head,the value is 2.7mm,the maximum stress takes place in the pin hole of cantilever lifting cylinder,the value is 248MPa.Research results provide the basis for improving the structure of the cutting mechanism of hard rock roadheader,ameliorating its force condition and working performance and extending useful life.

关 键 词：硬岩掘进机 截割机构 强度 有限元 

分 类 号：TD421.5[矿业工程—矿山机电]