检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周秦岭[1] 卢兴强[2] 张光[1,3] 陈丹平[1] 胡丽丽[1]
机构地区:[1]中国科学院上海光学精密机械研究所强激光材料重点实验室,上海201800 [2]中国科学院上海光学精密机械研究所高功率激光物理国家实验室,上海201800 [3]中国科学院研究生院,北京100049
出 处:《光学学报》2010年第5期1497-1500,共4页Acta Optica Sinica
基 金:国家自然科学基金(60707019;60878043)资助课题
摘 要:通过全矢量有限差分法数值模拟,设计了一种大模面积平顶模场光子晶体光纤。光纤截面上空气孔为三角形格子分布,中心七个空气孔缺失并在其中心引入一低折射率区域。分析了内纤芯大小、空气孔间距和空气孔相对大小等参数变化对内纤芯折射率、基模模面积等特性的影响。给出了工艺上简单易行的平顶模场光子晶体光纤结构,其平顶模面积可达2000μm2。发现增加内纤芯尺寸和导光波长,降低空气孔相对尺寸,可以减少光纤中的高阶模含量。A novel design approach of realizing flattened mode large mode area photonic crystal fibers(PCFs) is presented by introducing a depressed-index region in the core of 7-rod core triangular PCFs.The influences from structural parameters,such as the size of depressed inner core,air hole pitch and the relative size of air hole,on the refractive index of inner core and the fundamental mode area are calculated with full-vectorial finite-difference method.A flattened mode PCF with mode area as large as 2000 μm2 is given,which can be easily fabricated with present technique.In the simulation,it is also found that less higher order modes will be contained in the fiber by scaling the depressed inner core and light wavelength as well as decreasing the relative size of air hole.
关 键 词:光纤光学 平顶模式场光子晶体光纤 有限差分法
分 类 号:TN913.7[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33