已建多孔板砌体房屋整体抗震加固方法  

Seismic strengthening methods of existing masonry houses with fabricated hollow slabs

作　　者：李树林[1] 裴红[2] 杨斌[3] 

机构地区：[1]南京工业大学工程检测鉴定与加固中心,南京210009 [2]中国电子科技集团公司南京十四所,南京210013 [3]江苏广播电视大学建工学院,南京210036

出　　处：《建筑结构》2010年第5期23-25,66,共4页Building Structure

摘　　要：汶川地震震害表明,楼面采用多孔板结构的多层砌体房屋,由于砌体质量较差,或圈梁、构造柱设置不足,或混凝土强度较低,导致墙体抗震承载力不足;楼面多孔板缺乏整体性,楼面结构与墙体结构不能构成一个完整的空间结构。在地震作用下,多孔板缺乏整体调节作用,致使大量房屋倒塌。提出了几种针对该类结构的加固方法,并进行了多孔板粘钢拼接静载试验,其结果表明,加固后多孔板楼面脆断的可能性能够消除。Seismic damage of Wenehuan Earthquake shown that the floor of multi-story masonry buildings with fabrieatied hollow slabs had following disadvantages： poor quality masonry, lack of enough ring beams and construction columns, low concrete strength, or all of them. These shortcomings led to low seismic bearing capacity of the wails and poor integral quality of fabricated hollow slabs. The floor and wall couldn＇t form a whole spatial structure. A large number of houses collapsed because of the poor integrity under earthquake. Some strengthening methods were proposed. Static load test of fabricated hollow slabs with bonded steel was carried out, and the result indicates that it is possible to avoid brittle fracture of fabricated hollow slabs.

关 键 词：砌体结构 多孔板 整体性 抗震措施 

分 类 号：TU352.11[建筑科学—结构工程]