施压加工对钽铜爆炸复合板性能的影响  

THE EFFECT OF FLOW FORMING ON PROPERTY OF TA CU EXPLOSIVE CLADDING PLATE

作　　者：樊新民[1] 石连捷[1] 

机构地区：[1]南京理工大学材料科学与工程系

出　　处：《弹道学报》1999年第1期48-50,共3页Journal of Ballistics

摘　　要：本文通过金相和显微硬度分析，讨论了旋压加工对钽铜爆炸复合板性能的影响．结果表明：钽铜爆炸复合板具有足够高的强度，能承受施压加工时的较大塑性变形．施压后复合板整体硬度升高．施压加工后的复合板加热到４００℃时，铜已完全再结晶。The effect of flow forming on property of Ta Cu has been studied by use of metallography and microhardness. The results show that the interface strength is so high that it can stand flow forming. There is increase in microhardness of Ta Cu plate after flow forming. When Ta Cu plate is heated to 400℃, copper is recrystal lized and stress of tantalum is relieved partly.

关 键 词：爆炸复合 施压加工 药型罩 破甲弹 钽铜复合板 

分 类 号：TJ410.333[兵器科学与技术—火炮、自动武器与弹药工程] TJ413.2