烯丙基COPNA-BMI树脂的流变特性  被引量:3

Rheological Behavior of the Copolymer Resin of Ally-COPNA Resin and BMI

在线阅读下载全文

作  者:李金土[1] 林起浪[1] 柯余良[1] 田鹏辉[1] 

机构地区:[1]福州大学材料科学与工程学院,福建福州350108

出  处:《高分子材料科学与工程》2010年第5期54-56,共3页Polymer Materials Science & Engineering

基  金:国家自然科学基金资助项目(50802015);福建省青年创新基金(2006F3067)

摘  要:研究了一种可用于固体润滑的烯丙基COPNA-BMI树脂的流变特性。在黏度实验和差热分析(DSC)实验基础上,并根据双阿仑尼乌斯方程,建立了与实验数据较为相符的化学流变模型,同时对树脂黏度进行了预测。结果表明,在120℃~160℃范围内,树脂的相对黏度特性符合双阿仑尼乌斯黏度方程,所建立的模型较好地表征了树脂的流变特性;树脂在温度小于120℃时固化反应迟缓,初始黏度较高;随着温度的进一步提高,树脂初始黏度降低,黏度随时间增长加快,在170℃左右黏度急剧上升;树脂比较理想的成型温度应选择在150℃左右。Rheological behavior of the copolymer resin of allyl condensed polynuclear aromatic (COPNA) resin and bismaleimide (BMI) for solid lubricant composite was studied with differential scanning calorimetry (DSC) analysis and viscosity experiments. A rheological model based on Dual-Arrhenius equation was established and used to simulate and forecast the rheological behavior of the resin. The results indicate that the established rheological model for relative viscosity is in good agreement with Dual-Arrhenius equation in the temperature range of 120 ℃~160 ℃. The initialized viscosity of the resin decreases with increasing temperature,and the relative viscosity increases with increasing time at certain temperature. The ideal processing temperature of the resin is about 150 ℃ in terms of the rheological model.

关 键 词:流变 烯丙基 COPNA树脂 4 4′-二苯甲烷双马来酰亚胺 共聚树脂 

分 类 号:O631.21[理学—高分子化学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象