球头铣刀和工件之间加工倾角的试验研究  

Experimental Study on Machining Obliquity Between Ball-end Cutter and Workpiece

作　　者：陈英[1,2] 王义强[1] 程操宇[1] 

机构地区：[1]吉林大学机械科学与工程学院,吉林长春130025 [2]吉林工程技术师范学院机械工程学院,吉林长春130052

出　　处：《吉林工程技术师范学院学报》2010年第4期78-80,共3页Journal of Jilin Engineering Normal University

摘　　要：通过实验研究了球头立铣刀与加工表面倾角之间的关系,得出用高速钢球头立铣刀加工硬铝合金时的较优倾角,并指出倾角编程策略。The relation of ball-end cutter and the obliquity of machined surface is studied by experiment.The preferably obliquity of hard alloy cut by high-speed steel is educed and the programming strategy of obliquity is concluded.

关 键 词：球头铣刀 倾角 表面粗糙度 

分 类 号：TG54[金属学及工艺—金属切削加工及机床]