NEBS认证——稳态电力线感应(一)  

Steady-state Power Induction of the NEBS Authentication Part 1

作　　者：徐加征[1] 

机构地区：[1]中兴通讯南京研发中心

出　　处：《安全与电磁兼容》2010年第1期53-57,共5页Safety & EMC

摘　　要：介绍了NEBS认证对网络设备的稳态电力线感应抗扰度的标准要求和测试方法。主要包括长回路、短回路、中继线路的稳态电力线感应标准要求和测试方法。这部分的要求适用于附录A中端口类型1和类型3的网络设备。如果被测设备用在长回路通信线缆(大于20kft)中,采用2节中的标准;用在短回路通信线缆(小于20kft)中,选择第3节中的标准;用于中继干线中,采用4节中的标准。然而这些要求都不适合长度小于5kft的通信线缆。This thesis introduces the criteria and testing methods of steady-state power induction in NEBS authentication. According to the characteristics of network equipments, they are divided into three types, including long loops, short loops, and trunks. In this thesis the criteria and testing methods for three kinds of equipments are introduced respectively. These criteria apply to network equipment with port types 1 and 3 as described in appendix A. If EUT is to be used on a long loop （greater than 20 kft）, section 2 should be adopted; if it is confined to a short loop （less than 20 kft）, section 3 should be adopted; if it is to be used on trunks, it should be tested according to section 4. However, these criteria do not apply to equipment intended to be used only for loops less than 5 kft.

关 键 词：NEBS 电力线感应 长回路 短回路 中继线路 电磁兼容 

分 类 号：TN913.32[电子电信—通信与信息系统]