检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘阳[1] 郭子雄[1] 欧阳文俊[1] 朱雁茹[1]
机构地区:[1]华侨大学,福建泉州362021
出 处:《土木工程学报》2010年第6期57-66,共10页China Civil Engineering Journal
基 金:教育部新世纪优秀人才支持计划项目(NCET-06-0571);国家自然科学基金项目(50478120)
摘 要:在钢筋混凝土(RC)柱中配置核心型钢以提高超高轴压比柱的抗震性能。进行9个核心型钢混凝土(CSRC)柱试件的低周反复加载试验,主要试验参数包括核心型钢配钢率、轴压比和核心型钢截面形式。通过试验数据检验各参数对试件强度、刚度、延性、滞回特性、耗能能力和轴向变形性能等的影响。基于试验结果和平截面假定,研究并提出CSRC柱轴压比限值的简化计算方法。研究结果表明,设置核心型钢可有效提高RC柱的变形能力和滞回耗能能力,提高RC柱的轴压比限值。随核心型钢配钢率的增大,试件强度和刚度衰减速度减缓,耗能能力增加。核心型钢可有效提高重载RC柱弹塑性阶段竖向承载能力的稳定性。计算分析结果表明,根据轴向变形协调计算的CSRC柱轴压比限值与试验吻合较好,可供工程实践参考。提出了考虑核心型钢配钢率的CSRC柱轴压比限值的建议取值。The seismic behavior of reinforced concrete (RC) columns with high axial load can be improved with core steel set in the central section of the columns. Nine core steel reinforced concrete (CSRC) columns were tested under cyclic loading with core steel ratio, axial compression ratio and section formation of core steel as the main parameters. The effects of these parameters on the strength, stiffness, ductility, hysteretic behavior, energy dissipation capacity and axial deformation behaivor of CSRC columns were investigated using the test results. A simplified method of calculation for the limit value of axial compression ratio of CSRC columns was proposed based on plane section assumption and the test results. It is indicated that the deformation capacity and energy dissipation capacity of RC columns were effectively enhanced and the limit value of axial compression ratio of RC columns was increased when core steel was used. Strength and stiffness deteriorations were reduced and the hysteretic energy dissipation capacity was increased when the steel ratio of specimens was increased. The axial stability of RC columns during plastic deformation phases was remarkably enhanced due to the core steel. The simplified calculation method for the limit value of CSRC column axial compression ratio agreed well with the test results. Limit values of CSRC column axial compression ratio considering core steel ratio were proposed .
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.143.110.248