涂层刀具切削过程中的自组织现象研究  

Study on Self Organization During Cutting Process of Coating Tools

作　　者：侯志刚[1,2] 赵军[1] 宋新玉[1] 徐立强[2] 郭忠[2] 

机构地区：[1]山东大学高效洁净机械制造教育部重点实验室山东大学机械工程学院,山东济南250061 [2]烟台大学机电汽车工程学院,山东烟台264005

出　　处：《制造技术与机床》2010年第6期66-68,共3页Manufacturing Technology & Machine Tool

基　　金：国家973计划项目(2009CB724402);中国博士后科学基金面上项目(20080431174);山东省博士后创新专项资金项目(200702026)

摘　　要：对两种类型的多层复合涂层刀具进行了车削45和T10A淬硬钢的切削实验,进行了相应的SEM和XRD分析。实验结果表明,在两种涂层刀具的切削过程中均有自组织现象发生,自组织结构的产生、稳定存在和破坏消失分别与刀具的初期磨损、正常磨损和急剧磨损阶段相对应,证明在涂层刀具的摩擦磨损过程中存在着自组织作用机理。Cutting experiments were performed using two types of multi-layer coating tools turning hardened 45 and T10A steel.SEM and XRD analysis were conducted on cutting tools.The results show that self organization exists during the cutting process of the coating tools.The formation,steady existence and disappearance of the self organization structure correspond respectively with the initial,normal and severe wear stage of the typical tribology process.The self organization mechanism is of great significance on the improvement of coating tool life.

关 键 词：涂层刀具 切削 自组织 

分 类 号：TG711[金属学及工艺—刀具与模具]