检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周诗岽[1] 吴志敏[1] 吴明[2] 王树立[1] 赵会军[1]
机构地区:[1]江苏工业学院油气储运技术省重点实验室 [2]辽宁石油化工大学储运与建筑工程学院
出 处:《石油机械》2010年第5期11-14,103,共4页China Petroleum Machinery
基 金:江苏省油气储运重点实验室资助项目"管道输送与泄漏检测技术研究"(Cy0805);辽宁省教育厅基金项目"东北管网中国大庆-俄罗斯混输原油安全优化运行技术"(2007T104)
摘 要:针对原油差温顺序输送工艺,建立了原油顺序输送管道安全停输时间计算模型,利用有限差分法对停输模型和再启动模型进行离散化,采用迭代法计算最小安全停输时间。以原油管道顺序输送大庆油和俄罗斯油为例,分别探讨混油界面位置、油品输量、油品输送温度和油品输送顺序对安全停输时间的影响。研究结果表明,大庆油顶俄油的停输时间长于俄油顶大庆油的停输时间;混油界面离出站点越远,停输时间越短;油品输送温度越高,停输时间越长;油品输量越大,停输时间越长。According to the technology of crude oil thermal differential transportation,the calculation model for the safety shutdown time of oil batch transportation pipeline was established.The finite difference method was applied to discretize the shutdown model and restart model;the iteration method was adopted to calculate the minimum safety shutdown time.Take the batch transportation of Daqing and Russian oil,for example.The effect of batching interface position and volume,transportation temperature and sequence of oil products on safety shutdown time were discussed respectively.The result shows that the shutdown time of Daqing oil to Russian oil is longer than that of Russian oil to Daqing oil;the farther away the batching interface is from the exit point,the shorter the shutdown time;the higher the crude oil transportation temperature,the longer the shutdown time;the larger the volume of oil products,the longer the shutdown time.
分 类 号:TE973.1[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229