柱塞结构对高压脉动水锤装置产生压力冲击的影响  

The effect of plunger on producing pressure impact of the water-hammer device for high impulse pressure

作　　者：程德凡[1] 张景松[1] 张飞[1] 魏利军[1] 

机构地区：[1]中国矿业大学机电工程学院,徐州221008

出　　处：《机械设计与制造》2010年第5期157-159,共3页Machinery Design & Manufacture

基　　金："十一五"国家科技支撑计划项目(2008-10)

摘　　要：高压脉动水锤装置产生压力冲击的过程中,柱塞起着传递能量和产生冲击的作用,其结构上的尺寸比例与水锤装置的输入、输出压力比值存在一定的关系。文章通过假设,理论分析得出了这一关系式,并通过实验来进行了测试验证,得出结论为水锤装置压力比极值所对应的柱塞直径比位于1:3～1:2之间。最后针对理论与实验之间的差异进行了简单的分析。In the process of producing pressure impact of the water-hammer device for high impulse pressure,the plunger plays as the role to transmit power and produce impact.And there is a relationship between the dimensional proportion of plunger and the pressure ratio of the water-hammer device.Based on some hypothesis,this paper deduced a theoretic equation of this relationship,and checked it by some verified experiments,attained the conclusion that the plunger＇s diameter ratio,which is correspondence with the pressure ratio extremum of the device,is between 1：3 and 1：2.At last,we did some analysis for the difference between the therotical result and the experimental one.

关 键 词：柱塞结构 冲击压力 比例关系 

分 类 号：TH16[机械工程—机械制造及自动化]