粉状生物质和半焦的喂料特性分析  

Analysis of feeding characteristics of pulverized biomass and chars

作　　者：袁廷璧[1] 易维明[1] 李永军[1] 李志合[1] 殷哲[1] 田中君[1] 

机构地区：[1]山东理工大学轻工与农业工程学院山东省清洁能源工程技术中心,山东淄博255049

出　　处：《山东理工大学学报（自然科学版）》2009年第5期50-53,共4页Journal of Shandong University of Technology:Natural Science Edition

摘　　要：为了研究粉状生物质和半焦的喂料特性,设计了粉状生物质喂料器.通过对40-60目的玉米秸粉和两种流化床热解半焦的喂料试验,得到了粉状生物质喂料量与喂料电动机转速的关系,并且对三种物料的实际下料量和理论值进行了比较.实验发现,几种物料都可以实现定量连续下料,粒径越小的物料在相同电动机转速下下料量越大;混合目数的物料落料量较少但更容易控制.In order to study the feeding character of pulverized biomass and chars,a feeding device was designed.Using a pulverized biomass and two kinds of biomass chars,which were the residue of fluidized bed,as feedstocks,the relationship between voltage of electrical machine and its rotate speed was obtained,and the actual flow of the three feedstocks was compared with the theoretical value.Experiment results shows that all the feedstocks could be feed on accurately and continuously,and the smaller the diameter of granules,the heavier the feeding flow under the same revolving speed.Comparatively,the feedstock with mixed meshes is less but chould be better controlled.

关 键 词：生物质粉 半焦 流化床 喂料 

分 类 号：S216[农业科学—农业机械化工程]