稠油油藏蒸汽泡沫驱渗流机理  

Foam Flowing Mechanisms of Steam-Foam Flooding for Heavy Oil Reservoirs

作　　者：齐宁[1] 李金发[2] 温庆志[1] 曲占庆[1] 张贵才[1] 

机构地区：[1]中国石油大学(华东)石油工程学院,山东东营257061 [2]中国石化胜利油田分公司滨南采油厂,山东滨州257600

出　　处：《辽宁石油化工大学学报》2009年第4期34-38,共5页Journal of Liaoning Petrochemical University

摘　　要：针对吞吐开采后期稠油油藏压力大幅下降、注汽汽窜等问题,研究了集洗油、调剖、降粘三效合一的高温复合驱油体系。采用FCY泡沫剂作为三效合一的高温复合驱油体系的发泡剂,利用稳态法测定了泡沫的封堵效果,通过渗流实验考察了渗流速度对封堵压差的影响及泡沫作用下气体渗流机理,并根据渗流机理实验结果,建立了阻力因子泡沫渗流模型。模型的计算结果与实验结果具有较好的一致性,模型在描述泡沫剪切变稀特性的同时,还考察了临界含水饱和度、毛管数指数等各参数对气体渗流的影响,为稠油油藏蒸汽泡沫驱提供了理论支持。High temperature composite flooding systems with oil-washing,profile-controlling,viscosity-reduction functions were developed.It is used to solve the severe problems which were faced in the late development stage such as heavy oil reservoirs pressure declining greatly and ineffective steam channeling in high permeability zones,etc.FCY high temperature multifunctional foamer was researched as foaming agent of high temperature composite flooding systems,and plugging capacity of foam was measured by stable method.Effects of percolation velocity on plugging pressure differential and gas percolation mechanism under the existence of foam were researched by percolation experiments.Moreover,the resistance factor foam percolation model was built up based on experiment results of foam percolation mechanism.Good consistency between results from model and experiment results was found,and shear-thinning behavior of foam is described preferably.Effect of whole parameters,such as critical water saturation,capillary number,on gas percolation was also performed,and theory support is provided for steam-foam flooding in heavy oil reservoirs.

关 键 词：泡沫驱 注蒸汽 渗流机理 稠油油藏 阻力因子 

分 类 号：TE357.46[石油与天然气工程—油气田开发工程]