检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:姚遥[1] 刘东[1,2] 廖怀庆[1] 何维国[3] 张宇[3] 包海龙[3]
机构地区:[1]上海交通大学电子信息与电气工程学院,上海200240 [2]国家能源智能电网(上海)研发中心,上海200240 [3]上海市电力公司,上海200122
出 处:《华东电力》2010年第5期677-680,共4页East China Electric Power
基 金:国家自然科学基金重点项目资助项目(90612018);国家重点基础研究发展计划(973计划)资助项目(2009CB219703);教育部新世纪优秀人才支持计划项目
摘 要:电池储能由于其高度可控性和模块化的特点,可广泛应用于配电网络,起到提高供电可靠性以及平滑负荷等作用。以钠硫电池为例,对储能电池系统进行了建模及计算仿真,并将仿真结果接入算例网络,使用潮流法进行了配网的线损计算。算例结果表明,在配电网络的合理位置接入合理容量的储能电池,并考虑电池本身的加热损耗后,有降低线损率的实际效果。Because of the characteristic of highly controllability and modularization,battery energy storage could be widely applied in the distribution network for improving the reliability of power supply and smoothing the load.Taking the sodium-sulfur battery for example,the modeling and simulation of the energy storage battery system were performed.The simulation results were connected to the example network,and the line loss of the distribution network was calculated by using power flow method.The example results showed that,if the energy storage battery with proper capacity was connected to the distribution network at a proper position,it was effective in reducing the line loss after the heating loss of the battery itself was considered.
分 类 号:TM727[电气工程—电力系统及自动化] TM911
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.58.213.82