鞍钢东烧厂厚料层烧结配碳和配矿研究  

An Experiment of Deep Bed Sintering at East Anshan Sintering Plant of AISC

作　　者：王常秋[1] 吴铿[2] 侯恩俭[1] 付平[2] 何海熙[2] 万鹏[2] 

机构地区：[1]鞍钢集团矿业公司东烧厂,辽宁鞍山114000 [2]北京科技大学冶金与生态工程学院,北京100083

出　　处：《钢铁研究学报》2010年第6期14-17,共4页Journal of Iron and Steel Research

基　　金：国家高技术研究发展(863)计划资助项目(2006AA06Z121);国家自然科学基金"钢铁联合研究基金"资助项目(50874129)

摘　　要：在实验室条件下,以目前鞍钢集团矿业公司东烧厂生产的原料配比为基础,采用自产精矿为主要原料,通过改变配碳量和配矿进行600、650和700 mm料层烧结杯试验,分析了700 mm料层中3种配碳量、2种配矿以及料层厚度对烧结技术经济指标的影响,为进一步提高东烧厂料层厚度提供了理论依据。Based on the current materials rate in East Anshan Sintering Plant, taking hematite concentrate as major raw material, sinter-pot test with 600, 650 and 700 mm bed height was carried out under the laboratory condition. The effects of three carbon contents and two blending schemes on the technical-economic indexes were investigated. The research will provide theoretical basis for further improving bed depth at East Anshan Sintering Plant.

关 键 词：自产精矿 烧结杯试验 配碳量 技术经济指标 

分 类 号：TF046.4[冶金工程—冶金物理化学]