检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]浙江大学化工机械研究所,杭州310027 [2]浙江大学热工与动力系统研究所,杭州310027
出 处:《动力工程学报》2010年第6期395-399,共5页Journal of Chinese Society of Power Engineering
基 金:"十一五"国家科技支撑计划资助项目(2006BAF01A46-8)
摘 要:分别采用"整体简化计算"、"忽略热负荷分布不均匀性的分段计算"和"考虑热负荷分布均匀性的分段计算"三种方案对锅炉蛇形蒸发管的水动力特性进行了理论分析,研究了热负荷分布不均匀性对蛇形蒸发管水动力特性和阻力值的影响.结果表明:蛇形蒸发管的水动力特性与其热负荷分布及布置形式均有关;在特定条件下,采用忽略热负荷分布不均匀性的简化算法求解蛇形蒸发管的水动力特性可能导致较大的误差,并会影响水动力特性可靠性的准确分析.Theoretical analysis was carried out for hydrodynamic characteristics of the coil tubes of evaporating heat-absorbing surface in boiler by following three schemes, "integral simplifying calculation", "sectional calculation ignoring uneven distribution of thermal load" and "sectional calculation taking account of uneven distribution of thermal load". The effects of uneven distribution of thermal load on hydrodynamic characteristics and resistance of the coil tubes of evaporating heat-absorbing surface were studied. Results show that the hydrodynamic characteristics of the coil tubes of evaporating heat-absorbing surface are related to the distribution of thermal load and arrangement of the coil tubes. Under special conditions, the simplification method which ignores uneven distribution of thermal load will cause larger error and affect the accurate analysis of the realibility for hydrodynamic characteristics.
关 键 词:锅炉 蛇形蒸发管 受热面 水动力特性 热负荷 分布不均匀 分区计算
分 类 号:TK212.2[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.50