基板预变形对不锈钢激光立体成形件应力应变的影响  

Effect of Substrate Pre-deformation on Stress and Strain Fields of Stainless Steel Test-piece by Laser Solid Forming

作　　者：付兴领[1] 林鑫[1] 于君[1] 陈静[1] 黄卫东[1] 

机构地区：[1]西北工业大学凝固技术国家重点实验室,陕西西安710072

出　　处：《热加工工艺》2010年第11期178-181,共4页Hot Working Technology

基　　金：新世纪优秀人才支持计划(NCET-06-0879);国家自然科学基金项目(50971102);西北工业大学基础研究基金项目(NPU-FFR-JC200808);凝固技术国家重点实验室(西北工业大学)自主研究课题(16-TZ-2007;39-QZ-2009);高等学校学科创新引智计划项目(08040)

摘　　要：采用316不锈钢粉末和304L基板,通过一系列预变形矩形试样的激光立体成形正交实验,并通过小孔释放法进行应力测试,分析了基板预变形处理对激光立体成形试样的残余应力和变形的影响。结果表明:预变形量对预变形条件下的激光立体成形试件的平整度影响最大,其次为激光功率,激光速率。基板预变形后的应力分布显著影响激光立体成形后试样最终的变形形状。激光成形件上部熔覆层的残余应力σx先增大后减小,σz先减小后增大。研究结果为优化预变形条件下的激光立体成形工艺提供了参考依据。With relevant orthogonal test and hole-drilling method, the effects of substrate pre-deformation on residual stress and strain of 304L stainless steel test-piece by laser solid forming （LSF） with 316 powder were researched. The results show that the pre-deformation has greater effects on the roughness, next is laser power and speed. The stress fields in the substrate after pre-deformation has a great effect on the final shape. It is found that the residual tensile stress σz first increases and then decreases, but the σz has an opposite trend.

关 键 词：激光立体成形 预变形 正交试验 ANSYS 

分 类 号：TG665[金属学及工艺—金属切削加工及机床]