酸性条件下高锰酸钾预处理氰化尾渣的试验研究  

Pretreatment of Cyanide Tailings with Potassium Permanganate in Acid Media

作　　者：翟毅杰[1] 李登新[1] 王军[1] 鄢祖喜[1] 

机构地区：[1]东华大学环境科学与工程学院,上海201620

出　　处：《矿冶工程》2010年第3期66-69,共4页Mining and Metallurgical Engineering

基　　金：国家863科技攻关项目(2006AA06Z132);教育部重点项目(107124);上海市重点学科(B604)

摘　　要：在酸性条件下采用高锰酸钾对氰化尾渣进行预处理,分解载金黄铁矿。试验主要考察了反应时间和温度、矿浆浓度、高锰酸钾用量、硫酸初始浓度等因素对预处理效果的影响,并确定了最佳反应条件。实验表明,在固液比1∶20,高锰酸钾用量75 g/L,反应时间5 h,反应温度80℃,硫酸初始浓度1.3 mol/L,对应的铁浸出率及矿样失重率分别为92.82%和47.94%,预处理效果较好。Cyanide tailings were pretreated with potassium permanganate in acid media to decompose gold-bearing pyrite.The effects of reaction time and temperature,slurry density,the dosage of potassium permanganate and initial concentration of sulphuric acid on the effectivensess of pretreatment were investigated and the optimum reaction conditions were determined.The results showed that under the conditions that the solid-liquid ratio was 1∶20,the dosage of potassium permanganate was 75 g/L,reaction time was 5 h,reaction temperature was 80 ℃ and initial concentration of sulphuric acid was 1.3 mol/L,the corresponding leaching rate of iron and weight-loss rate of ore samples were 92.82% and 47.94% respectively,and the pretreatment effectiveness was good.

关 键 词：氰化尾渣 高锰酸钾 铁浸出率 失重率 预处理 

分 类 号：TF111[冶金工程—冶金物理化学]