LAMOST反射施密特改正镜新型镜罩设计  

Design of a Novel Cover of the Reflecting Schmidt Plate of the LAMOST

作　　者：周国华[1,2] 王海[1,2] 杨德华[1,2] 

机构地区：[1]中国科学院国家天文台南京天文光学技术研究所,江苏南京210042 [2]中国科学院天文光学技术重点实验室,江苏南京210042

出　　处：《天文研究与技术》2010年第3期277-282,共6页Astronomical Research & Technology

基　　金：国家"九五"重大科学工程LAMOST望远镜(0983)资助

摘　　要：针对LAMOST反射施密特改正镜的特殊防护及功能要求,经多种方案设计和实验,最终设计和制造了一套新型轻质帘式镜罩系统,并得到了成功应用。首先回顾LAMOST反射施密特改正镜镜罩的功能要求,以及镜罩的样机实验和方案遴选;详细介绍最终选定的新型轻质帘式镜罩系统的具体机械结构、电气控制方法以及现场安装调试等研究设计工作。该新型镜罩主体功能件为轻型布帘罩体,两侧各通过一组滑块联接于两根平行的弯曲C形轨道,并由2组4只电机通过拉线的方式实现电动开闭;为允许反射施密特改正镜可转至竖直位置,轨道的末端采用电动推拉实现弯折,以避免结构干涉。该镜罩已在LAMOST望远镜上投入正常运行,安全性得到了考验和确认。Based on various designs and tests a novel lightweighted curtain-type design of cover has been successfully implemented to meet the requirements of special protection and functions of the LAMOST reflecting Schmidt plate.In this paper,we first review the technical requirements for the cover.Before the final design is adopted,we investigated two prototypes of covers.Our subsequent work has been focused on the mechanical design,electronic control,and on-site installation/debugging of the cover of the novel design.The main functional part of the cover is a lightweighted curtain which is simply adapted from pieces of parachute cloth.On each side of the curtain,there is a group of sliders residing in a curved rail of a Cshaped cross section and driven by two groups of motors（two in each group） through a cable.The motors on two sides drive the opening and closing of the curtain under automatic control.Particularly,the ends of both rails can be folded by electrically controlled pull-push mechanisms to avoid mechanical interference so that the Schmidt plate can cover all the required inclination range（including the vertical orientation of the plate）.The cover has been working propering on the LAMOST telescope,which confirms its secureness and reliability.

关 键 词：天文望远镜 镜罩 轨道 传动机构 自动控制 

分 类 号：P111[天文地球—天文学]