酚醛炭基C／C复合滑板材料的催化石墨化及其性能研究  

STUDY OF CATALYTIC GRAPHITIZATION AND PROPERTIES OF PF RESIN BASED C/C COMPOSITES

作　　者：肖绍懿[1] 刘洪波[1] 陈鸯飞[1] 何月德[1] 胡聪聪[1] 

机构地区：[1]湖南大学材料科学与工程学院,长沙410082

出　　处：《炭素》2010年第2期3-7,32,共6页Carbon

基　　金：国家重点基础研究发展计划（973计划）课题（编号2006CB600903）

摘　　要：通过溶剂分散法在酚醛树脂浸渍剂中引入催化剂，采用多次液相浸渍-炭化增密和催化石墨化处理的方法，制备出密度为1．60g·cm^-3左右、石墨化度大于77％的酚醛炭基C／C复合材料。对比考察了催化剂的引入和催化剂种类对酚醛炭基C／C复合材料石墨化度、电阻率、抗折强度和摩擦磨损性能的影响，探讨了酚醛炭基C／C复合材料用作受电弓滑板材料的可能性。结果表明：硼酸或二茂铁等催化剂的引入可显著提高酚醛炭基C／C复合材料的石墨化度，降低其电阻率和摩擦系数，改善其弯曲断裂韧性；添加硼酸催化剂的酚醛炭基C／C复合材料的导电性、抗折强度和摩擦磨损性能明显优于德国纯炭整体滑板材料，可望用作高速电力机车的受电弓滑板材料。The catalysts were introduced into the PF resin with solvent to synthesize the C/C composites by multitime liquid impregnation- carbonization and graphitization processes. Its density reaches around 1.60 g ·cm^-3 and the degree of graphitization is above 77%. The effects of the catalysts on the structures and the properties of the C/C composites were studied. The feasibility of the C/C composites as slide materials was explored. The results show that Boric acid and Ferrocene can remarkably enhance the degree of graphitization of the C/C composites, which decreases its resistivity and improves its toughness. The resistivity, the bending strength, and the friction property of the C/C composites with Boric acid are evidently superior to the German pure carbon slide, indicating potential applications of the C/C composites as slide materials.

关 键 词：C/C复合材料 催化石墨化 抗折强度 摩擦性能 

分 类 号：TB332[一般工业技术—材料科学与工程]