Conform连续挤压铝扁管生产线仿真建模及优化研究  

Simulation modeling and optimization research of Conform continuous extrusion aluminum tube production line

作　　者：陈红霞[1] 王晓昱[1] 周歆华[2] 

机构地区：[1]内蒙古工业大学机械学院,内蒙古呼和浩特010051 [2]中国标准化研究院,北京100088

出　　处：《锻压技术》2010年第3期153-157,共5页Forging & Stamping Technology

基　　金：内蒙古自然科学基金资助项目(2007110220720)

摘　　要：利用Flexsim仿真软件,建立了连续挤压生产线的仿真模型。通过对仿真模型运行结果的分析,有针对性地提出对清洗设备优化、切断工序优化、缩口工序优化、模具改造等几方面的仿真优化方案。采用优化方案后,挤压生产线平衡率由56.52%提高到了71.48%,产量由935 m提高到了3000 m。解决了整条流水线不平衡、设备利用率低的问题,提高了企业的生产效率。Simulation model of continuous extrusion production line was established using Flexsim simulation software.Based on the analysis operation results of simulation model,the optimization schemes,such as cleaning equipment optimization,cutting process optimization,necking process optimization and mould improvement were put forward.Adopting the optimization schemes,the balancing rate of extrusion production line increased to 71.48% from 56.52%,the output increased to 3000 m from 935 m.The results show that the optimization schemes can tackle the problems of imbalanced production line and low equipment utilization,and improve the production efficiency of enterprises.

关 键 词：连续挤压生产线 铝扁管 优化 仿真 

分 类 号：TP278[自动化与计算机技术—检测技术与自动化装置]