从氯盐水溶液中隔膜电解提取Ni-Fe合金  

Preparation of Ni-Fe Alloys from Chloride Aqueous Solutionby Diaphragm Electrowinning

作　　者：舒方霞[1] 刘瑶[1] 丛自范 

机构地区：[1]沈阳有色金属研究院,辽宁沈阳110141

出　　处：《有色矿冶》2010年第3期43-45,74,共4页Non-Ferrous Mining and Metallurgy

摘　　要：研究了从氯盐体系中隔膜电解提取Ni-Fe合金的工艺。实验主要考察了Ni2＋浓度、电解液pH值、H3BO3浓度、阴极电流密度、电解液温度对电流效率、槽压和产品质量的影响。结果表明,当电解液中[Fe2＋]=80 g/L,[Ni2＋]=40~50 g/L,[H3BO3]=15 g/L,pH=1.5~2.0时,在电流密度为300~350 A/cm2,温度为50~55℃的条件下,采用阴离子膜电解,电流效率可达98%,产品中镍含量在20%以上,可满足工业生产需要。Electrowinning process of Ni-Fe alloys from chloride aqueous solution is investigated.The influence of the Ni2＋ concentration,electrolyte pH,H3BO3 concentration,cathode current density,electrolyte temperature on current efficiency,cell voltage and quality of the deposits are studied experimentally.The results show that a comparative smooth and compact deposit of Ni-Fe alloys with 98% current efficiency can be achieved under the conditions of 80 g/L Fe2＋,40 ~ 50 g/L Ni2＋,15 g/L H3BO3,1.5 ~ 2.0 pH,300 ~ 350 A/cm2 current density and 50 ~ 55 ℃ temperature by anion-exchange membrane Electrowinning.The nickel content of Ni-Fe alloys is above 20%,which can satisfy the demands of the industrial production.

关 键 词：氯盐水溶液 电解 阴离子膜 NI-FE合金 

分 类 号：TQ114[化学工程—无机化工]