分光光度法测定腈纶中的二氧化钛含量  

Spectrophotometric measurement of titanium dioxide content in PAN fibers

作　　者：路光友[1] 王厚德[2] 

机构地区：[1]山东理工大学,山东淄博255049 [2]山东理工大学材料学院,山东淄博255049

出　　处：《合成纤维工业》2010年第3期64-65,共2页China Synthetic Fiber Industry

摘　　要：以变色酸为显色剂,采用分光光度法测定腈纶中微量二氧化钛(TiO2)含量。结果表明:在pH值为2.0～4.5的条件下,钛(Ⅳ)与变色酸反应生成稳定的紫红色络合物,其最大吸收波长为470 nm。该纤维中的TiO2质量分数为0.199%,测定结果的相对标准偏差为3.28%,加标回收率为96.6%～102.6%。Trace titanium dioxide （ TiO2 ） in PAN fibers were determined using chromotropic acid as a chromogenic reagent by spectrophotometry. The results showed that titanium （ Ⅳ ） was reacted with chromotropic acid to produce a stable violet red complex at the pH value Of 2.0 -4.5. Its maximum absorption wavelength was 470 nm. The fiber contained 0. 199% TiO2 by mass fraction. The relative standard deviation and the recovery of standard addition were 3.28% and 96.6% - 102.6% , respectively.

关 键 词：分光光度法 聚丙烯腈纤维 功能纤维 变色酸 二氧化钛测定 

分 类 号：TQ342.31[化学工程—化纤工业]