Ti-6Al-4V表面等离子合金层中渗Mo的扩散系数  

Diffusion coefficient of molybdenum in alloying layer on Ti-6Al-4V by plasma surface alloying technique

作　　者：李哲[1] 秦林[1] 马连军[1] 范爱兰[1] 张万祯 唐宾[1] 

机构地区：[1]太原理工大学表面工程研究所,太原030024 [2]平朔煤炭公司设计院,朔州038506

出　　处：《中国有色金属学报》2010年第6期1137-1142,共6页The Chinese Journal of Nonferrous Metals

基　　金：国家高技术研究发展计划资助项目(2007AA03Z521);国家自然科学基金资助项目(50501016;50771070);山西省青年科学基金资助项目(2006021023);山西省高等学校优秀青年学术带头人计划资助项目

摘　　要：研究采用双层辉光离子渗金属技术在Ti-6Al-4V合金表面制备Mo基改性层的Mo扩散过程。通过观察渗层截面组织形貌,测定各种合金化元素的分布情况,着重分析不同温度下不同元素的加入对Mo扩散行为的影响。结果表明:在800～950℃下,Ti-6Al-4V合金离子渗Mo后所得改性层厚度、Mo平均扩散系数及相同浓度下Mo的扩散系数都随温度升高而升高;由于反溅射和Ti-6Al-4V基体相变等原因,1000℃时各参数反常;加入合金元素W和N使Mo的扩散系数有所降低,Mo的平均扩散系数在单纯渗Mo时为2.37688×10-4,W-Mo共渗时为1.47127×10-4,W-Mo-N共渗时为7.02681×10-5。The molybdenum-based alloying layers on the surface of Ti-6Al-4V were prepared by a plasma surface alloying process.The microstructure and element distribution of the modified layers were examined.The diffuse process and the impact of temperature and alloying elements to diffusion coefficients of Mo（DMo） were studied.The results show that the depth of the molybdenum alloying layers,the mean diffusion coefficients of Mo（DMo） and the DMo at the same Mo concentration increase with increasing temperature in the rang of 800-950℃,while they are abnormal at 1 000℃ for the comprehensive influence of sputter and phase transition of the Ti6Al4V sample.Addition of tungsten and nitrogen reduces the DMo in different degrees,and Mo D values for alloying layers with Mo,W-Mo and W-Mo-N are 2.376 88×10^-4,1.471 27×10^-4and 7.026 81×10^-5,respectively.

关 键 词：TI-6AL-4V 钼 双辉离子渗金属技术 扩散系数 

分 类 号：TG156.8[金属学及工艺—热处理]