Barrier height and ideality factor dependency on identically produced small Au/p-Si Schottky barrier diodes  

Barrier height and ideality factor dependency on identically produced small Au/p-Si Schottky barrier diodes

在线阅读下载全文

作  者:M.A.Yeganeh S.H.Rahmatollahpur 

机构地区:[1]Faculty of Physics,Baku State University,Academic Zahid X■lilov ksi-23,AZ 1148,Baku,Azerbaijan [2]Departments of Physics,Sharif University of Technology,11365-9567,Tehran,Iran

出  处:《Journal of Semiconductors》2010年第7期16-21,共6页半导体学报(英文版)

摘  要:Small high-quality Au/P-Si Schottky barrier diodes(SBDs) with an extremely low reverse leakage current using wet lithography were produced.Their effective barrier heights(BHs) and ideality factors from current-voltage (Ⅰ-Ⅴ) characteristics were measured by a conducting probe atomic force microscope(C-AFM).In spite of the identical preparation of the diodes there was a diode-to-diode variation in ideality factor and barrier height parameters.By extrapolating the plots the built in potential of the Au /p-Si contact was obtained as V_(bi)=0.5425 V and the barrier height valueΦ_(b(c-V)) was calculated to beΦ_(B(C-V))=0.7145 V for Au/p-Si.It is found that for the diodes with diameters smaller than 100μm,the diode barrier height and ideality factor dependency to their diameters and correlation between the diode barrier height and its ideality factor are nonlinear,where similar to the earlier reported different metal semiconductor diodes in the literature,these parameters for the here manufactured diodes with diameters more than 100μm are also linear.Based on the very obvious sub-nanometer C-AFM produced pictures the scientific evidence behind this controversy is also explained.Small high-quality Au/P-Si Schottky barrier diodes(SBDs) with an extremely low reverse leakage current using wet lithography were produced.Their effective barrier heights(BHs) and ideality factors from current-voltage (Ⅰ-Ⅴ) characteristics were measured by a conducting probe atomic force microscope(C-AFM).In spite of the identical preparation of the diodes there was a diode-to-diode variation in ideality factor and barrier height parameters.By extrapolating the plots the built in potential of the Au /p-Si contact was obtained as V_(bi)=0.5425 V and the barrier height valueΦ_(b(c-V)) was calculated to beΦ_(B(C-V))=0.7145 V for Au/p-Si.It is found that for the diodes with diameters smaller than 100μm,the diode barrier height and ideality factor dependency to their diameters and correlation between the diode barrier height and its ideality factor are nonlinear,where similar to the earlier reported different metal semiconductor diodes in the literature,these parameters for the here manufactured diodes with diameters more than 100μm are also linear.Based on the very obvious sub-nanometer C-AFM produced pictures the scientific evidence behind this controversy is also explained.

关 键 词:Schottky barrier diodes conducting probe-atomic force microscope barrier height and ideality factor 

分 类 号:TN311.7[电子电信—物理电子学] TN303

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象