检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:祝春蕾[1] 宋虹霞[1] 胡丽云[1] 邓爱华[1]
机构地区:[1]上海高桥石化分公司聚氨酯事业部,200137
出 处:《聚氨酯工业》2010年第3期38-41,共4页Polyurethane Industry
摘 要:采用多元醇、甲苯二异氰酸酯和自制的开孔剂GK-350D制备了密度为32~35 kg/m3的聚醚型高回弹聚氨酯软质泡沫。用FoamatLR2-40 PFT型测定仪跟踪了泡沫的发泡过程,从其发泡曲线上求取了泡沫开孔后的下沉率,表征了开孔剂在泡沫中的开孔能力。结果表明,GK-350D用量为1.2份时,具有较高的开孔能力,开孔性能与国际同类产品水平相当,且没有影响聚氨酯泡沫制品的性能。The high resilience flexible polyurethane foams (HR foams) with the 32 -35 kg/m3density were prepared from polyether-based cell opener( GK-350D), polyether polyols ( GEP-330N, GPOP-36/30) and toluene diisocyanate (TDI-80). The foaming process and the foaming curves were measured on-line by means of Foamat LR2-40 PFT. The cell opening capability of cell openers were characterized using the rate of sink from the foaming curves at the same foam density. The experimental results showed that the cell opening capability of GK-350D was the strongest when the content was 1.2 portion, which was correspond to the international same product, and had no harmful effects the mechnical properties of the HR foams.
关 键 词:聚醚多元醇开孔剂 高回弹聚氨酯泡沫 开孔性能 下沉率 应用
分 类 号:TQ328.3[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229