商用软件在某离心叶轮研发中的差别  

The Different Simulation Results of Commercial Software on Development of Centrifugal Impeller

作　　者：李新宏[1,2] 李腾 陈党民 李连生[1] 黄淑娟[1] 

机构地区：[1]西安交通大学,陕西西安710049 [2]西安陕鼓动力股份有限公司,陕西西安710075

出　　处：《流体机械》2010年第6期41-44,共4页Fluid Machinery

摘　　要：分别采用Cosmosworks和Ansys Mechanical软件对某大流量系数离心叶轮的强度进行了研究,表明在相同条件下,要满足相同的强度要求,两种软件计算的叶片厚度差别较大。通过试验证明,Cosmosworks软件计算结果过于保守,Ansys Mechanical软件的计算结果更接近实际。Base on the same strength conditions,the strength of large flow coefficient centrifugal impeller was analyzed respectively by the Cosmosworks and Ansys Mechanical software.The different blade thickness result was derived from the different software.The results of experiment show that the simulation results of the Cosmosworks software are biased conservative,and the simulation results of the ansys mechanical software are more realistic.

关 键 词：离心叶轮 强度 叶片厚度 ANSYS MECHANICAL COSMOSWORKS 

分 类 号：TQ051[化学工程]