中深井小排量螺杆泵举升适应性分析  

The Lifting Adaptability Analysis of Small Displacement Screw Pump in Medium-deep Well

作　　者：赵凯兴[1] 胡占宏[1] 薛建军[1] 范振忠[2] 

机构地区：[1]大庆油田有限责任公司第八采油厂,大庆163514 [2]大庆石油学院石油工程系,大庆163318

出　　处：《科学技术与工程》2010年第21期5257-5259,共3页Science Technology and Engineering

摘　　要：针对小排量高扬程螺杆泵在大庆油田中深井的试验情况,分析了螺杆泵使用范围,并进行经济效益评价。结果表明,中深井小排量螺杆泵适用于产液量在(1～13)t/d、泵挂深度1600m以下的油井举升,合理转速为(60～140)r/min。定向井应用螺杆泵举升,井眼曲率不应大于5°/25m,并且应缩短洗井周期。螺杆泵与抽油机相比,单井节省投资10万元。In view of the experiment of small displacement high-lift screw pump in Daqing oilfeild medium-deep well,the screw pump＇s application range was analysed and the benefit evaluation was done.The results show that medium-deep well small displacement screw pump applys to the oil well lifting in which the fluid production is at （1~13） t/d,the depth of plunger under 1 600 m and advisability rotary speed is （60~140） r/min.When the screw pump lifting applied in the direction well,the borehole curvature should be not more than 5°/25 m and the purge period should be shortened.In comparison to the beam pumping unit,the screw pump single well investment cut down 100 000 yuan.

关 键 词：螺杆泵 举升 定向井 适应性 

分 类 号：TE933.3[石油与天然气工程—石油机械设备]