朝阳沟油田原油输送工艺  

Chaoyanggou Oilfield Crude Pipeline Transferring Technology

作　　者：张万恒[1] 洪书明[1] 刘焕玲[1] 

机构地区：[1]大庆油田设计院,黑龙江省大庆市163712

出　　处：《油气田地面工程》1999年第1期7-8,共2页Oil-Gas Field Surface Engineering

摘　　要：根据油田开发初期的产油量，应当建设一条Ф２１９× ７ｍｍ的输油管线，当产量达到峰值时，再建设一条同径的复线。两条Ф２１９ × ７ｍｍ管线的输油量同一条Ф２７３ ×７ｍｍ管线的输油量相当，显然两条Ф２１９ ×７ｍｍ管线用钢材量和施工造价要比一条Ф２７３ × ７ｍｍ管线造价要高因此建设了一条Ф２７３ × ７ｍｍ。输油管线，采用了油水交替的输送工艺，既满足了产量低时，同时也满足了产量达到峰值时的需要。According to the initial stage crude production, a Ф219 × 7mm oil pipeline should be constructed, when crude production gets to maximum, another pipeline(the same diameter)again constructed. The capacity of transportation of two Ф 219× 7mm pipelines are equal to the capacity of transportation of one Ф273× 7mm pipeline. It is obvious that two ac Ф219 × 7mm pipelines are higher than one Ф273 × 7mm pipeline in using amount of steel and construction cost. Therefore one Ф273 × 7mm pipeline is constructed and oil-water replace tranferring technology is adopted, It meets the needs in low production stage, meanwhile meets the needs in the stage when crude production gets to maximum.

关 键 词：大庆油田 输油 原油 工艺 管道运输 石油输送 

分 类 号：TE832.3[石油与天然气工程—油气储运工程]