银锌一次电池电液分配系统的二维模拟与优化  

2D Modeling and Optimization of Electrolyte Distributor for Silver-zinc Battery

作　　者：彭政[1] 赵书利[1] 余罡[1] 肖金生[2] 

机构地区：[1]中国船舶重工集团公司七一二研究所,武汉430064 [2]武汉理工大学汽车工程学院,武汉430070

出　　处：《船电技术》2010年第7期51-54,共4页Marine Electric & Electronic Engineering

摘　　要：针对电池组电液均匀性不足的情况,本文对电池组的进液分配系统进行模拟和优化。通过增加进口数量、采用锥形的进气总管可以使均匀性提高。但是进口数目的过多会不利于整个电池系统的布置,进气总管锥度过大将使进气总管的加工难度加大。所以双进口加锥形的进气总管一起使用是优化的趋势,本文中对采用双进口锥形的进气总管电池组的模拟工作表明其均匀性确实大大提高。Aimed at the poor distributing uniformity of electricity liquid, this paper simulates and optimizes the electrolyte distributor for silver-zinc battery. Increasing inlets number and using cone-shaped piping can improve the distributing uniformity. However too many inlets piping may disadvantage the overall arrangement of battery system and makes it more difficult to machining. By using two inlet and cone-shaped main inlet piping, simulation and optimization show that it gets a better electrolyte distribution equality than using singly.

关 键 词：银锌电池 分配系统 均匀性 优化 

分 类 号：TM911[电气工程—电力电子与电力传动]