基于GPRS电力远动通道监控系统设计  

Design of Power Telecontrol Channel Monitoring System Based on GPRS

作　　者：金香[1] 鲁毅[1] 赵建军[1] 吴鸿业[1] 刘桂香[1] 邢茹[1] 

机构地区：[1]包头师范学院物理科学与技术学院,内蒙古包头014030

出　　处：《内蒙古师范大学学报（自然科学汉文版）》2010年第4期382-384,共3页Journal of Inner Mongolia Normal University(Natural Science Edition)

基　　金：内蒙古自然科学基金资助项目(20080404MS0114);内蒙古高等学校科学研究项目(NJzc08135)

摘　　要：针对电力远动通道监控系统实时性较差的问题,设计了一个基于GPRS(General Packet RadioService)的电力远动通道监控系统.该监控系统由终端机和监控中心两部分组成,终端机以单片机ATmega 128为控制核心,辅之以内置TCP/IP传输协议的GPRS模块WISMO QuikQ 2406 B,实现对远动通道数据的采集、处理以及报警信息的无线传输.监测中心软件采用Borland C++Builder 6.0开发设计.实际应用表明,该系统能很好地满足系统的实时性要求.A power telecontrol channel monitoring system based on GPRS is designed to meet the real-time requirement of power system.The system is composed of terminal and monitoring center.In the terminal,taking the single chip microprocessor of ATmega128 as the core and the GPRS module WISMO QuikQ 2406 B including inner TCP/IP protocol as the complements,the acquisition and processing of the remote control data and the transmission of alarm message is completed.The software part of the monitoring center is realized by Borland C＋＋ Builder 6.0.It is proved that this system can well meet the real-time requirement in practical application.

关 键 词：电力远动通道 监控系统 通用分组无线业务(GPRS) 实时性 

分 类 号：TM734[电气工程—电力系统及自动化]