热分解法制备Y_2O_2S∶Eu^(3+)纳米粒子(英文)  

Nanocrystals Y_2O_2S∶Eu^(3+) Prepared by Thermolysis

作　　者：谭宁会[1,2] 王园媛[1,2] 廖佩坤[1,2] 刘艺成[1,2] 孟建新[1,2] 刘应亮[1,2] 

机构地区：[1]广州市暨南大学化学系 [2]暨南大学纳米化学研究所,广州510632

出　　处：《无机化学学报》2010年第8期1421-1425,共5页Chinese Journal of Inorganic Chemistry

基　　金：国家自然科学基金(No.20671042);广东省自然科学基金(No.0520055)资助项目

摘　　要：采用热分解法和硫熔法分别合成了纳米Y2O2S∶Eu3+和体相Y2O2S∶Eu3+。其中硫氧化钇纳米粒子的制备是以水热法合成的Y(OH)3为前驱体,随后在激活剂和硫的共同作用下焙烧得到的。结果表明,所得Y2O2S∶Eu3+为单一纯相纳米粒子,粒径分布集中,大小约80nm,而前驱体Y(OH)3为纳米棒状,形貌上的这一巨大变化是由激活剂和硫粉在高温煅烧过程所形成的熔融物的腐蚀作用造成的。荧光光谱分析表明,Eu3+能有效地掺入硫氧化钇基质中,并具有良好的发光性能。此外,还探讨了纳米粒子的形成机理。This paper reports the preparation process of Y2O2S∶Eu^3＋ nano-crystals by thermolysis method and the corresponding bulk Y2O2S∶Eu^3＋ by conventional sulfur flux method. Nano-crystals Y2O2S∶Eu^3＋ were synthesised by calcining the rod-like Y（OH）3 precursor,obtained from hydrothermal method,with co-activator and S powder. The results show that both bulk and nano-crystals Y2O2S：Eu^3＋ are with pure phase,hexagonal crystal structure. The hydrothermally prepared Y（OH）3 is in a rod-like morphology,while the calcined Y2O2S∶Eu^3＋ are narrow distributed nano-crystals,with an average size of 80 nm. The morphological change can be explained by the etching effect of the flux formed by the carbonate and S powder during high temperature calcination. It is concluded that Eu^3＋ could be effectively incorporated into yttrium oxysulfides and therefore shows good luminescent properties from the excitation and emission spectra. Besides,the mechanism is discussed too.

关 键 词：硫氧化钇 纳米粒子 发光性能 机理 

分 类 号：O614.32[理学—无机化学]