检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙强[1] 崔永生[2] 崔树标[1] 周华民[1]
机构地区:[1]华中科技大学材料成形与模具技术国家重点实验室 [2]向塘94829部队质量科
出 处:《上海交通大学学报》2010年第7期897-901,共5页Journal of Shanghai Jiaotong University
基 金:国家自然科学基金资助项目(50875095);国家高技术研究发展计划(863)项目(2009AA03Z104)
摘 要:研究了显像管玻壳成形过程中温度场集成冷却模拟方法,开发了工艺参数和模具冷却结构优化系统.该系统利用有限差分法,在厚度方向上对玻壳采用局部的一维瞬态分析,运用三维边界元方法模拟模具的三维热传导,玻壳和模具通过耦合分析来匹配型腔表面的温度和热流量.研究表明,所提出的集成和耦合数值模型模拟结果与实验结果吻合良好.An integrated cooling simulation method for the temperature field of the panel during the forming process was proposed.The simulation system for the optimization of processing parameters and in-mold cooling system structure design was developed.A finite-difference method based local one-dimensional transient analysis in the thickness direction is adopted for the panel part.A three-dimensional,boundary element method is used for the numerical implementation of the heat transfer analysis in the mold region.The part and mold analysis are coupled so as to match the temperature and heat flux on the glass-mold interface.This paper presented an integrated and coupled numerical model for analyzing the panel cooling process.The numerical results are in good agreement with the experimental ones.
分 类 号:TP391.9[自动化与计算机技术—计算机应用技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229