奥氏体合金铸铁的组织与性能研究  

Study on the Microstructure and Properties of Austenitic Alloy Cast Iron.

作　　者：郭珊 秦紫瑞[1,2] 张林洲[1,2] 郭宁 

机构地区：[1]大连耐酸泵厂 [2]大连理工大学

出　　处：《热加工工艺》1999年第2期11-13,共3页Hot Working Technology

摘　　要：采用金相显微镜、ｘ射线衍射与电子探针相结合的方法，分析了奥氏体会金铸铁的组织，并采用多种腐蚀试验方法研究了该合金铸铁的腐蚀行为。结果表明，在该铸铁中除了石墨和奥氏体基体外，还有合金渗碳体存在。经６２０℃×１．５ｈ空冷热处理后在热盐液介质中具有良好的耐蚀性和较高的抗电化学腐蚀、点蚀与晶间腐蚀性能。此外，该铸铁还具有较好的综合力学性能和满意的铸造性能，具有广阔的应用前景。A combination of optical microscope,X-ray difraction spectrum and EMPA is used to analyse the mi-crostructure of austenitic alloy cast iron,and many kinds corrosion test methods is used to investigate the corrosion be-haviour of the alloy cast iron.Experimental results show that,in this alloy cast iron,besides graphite and austenitic base,had yet alloying cementite.It had good corrosion resistance in heat salt solution medium and higher electrochemical cor-rosion resistance ,pitting resistance and intergranular corrosion resistance properties after 620℃×1.5 h AC heat treat-ment.Adition,the austenitic alloy cast iron had yet better synthetical mechanical properties and satisfied casting proper-ties,it prosesses wide applied prospects.[

关 键 词：奥氏体 铸铁 显微组织 性能 合金铸铁 

分 类 号：TG143.9[一般工业技术—材料科学与工程]