棉网清洁器工艺参数的选择范围探讨  

Selection of Web Cleaner Processing Parameter

作　　者：孙鹏子[1] 许兰杰[1] 曹继鹏[1] 郭昕[1] 

机构地区：[1]辽宁省辽东学院

出　　处：《棉纺织技术》2010年第8期62-65,共4页Cotton Textile Technology

基　　金：辽宁省教育厅高等学校重点培育学科基金资助项目(2009432);辽宁省自然科学基金资助项目(20092184)

摘　　要：研究棉网清洁器工艺参数的选择范围。对导板式与反齿导向盖板式的棉网清洁器在梳棉机不同位置处的工艺参数选择进行了详细的讨论以及试验,给出了前后固定盖板隔距、导板长度、导板和反齿导向盖板与锡林及除尘刀的距离、除尘刀的角度、除尘刀与锡林隔距及风量大小选择的范围。认为:导板长度可在25 mm^35 mm之间选择,导板隔距可在1.0 mm^3.0 mm之间选择。导板或反齿导向盖板与除尘刀的距离可在5 mm^10 mm之间选择。Seleetion range of web cleaner processing parameter was discussed. Processing parameter selections were discussed and tested in details when locations of plate web cleaner and reverse teeth guide flat web cleaner are different. Selection range of fi＇ont and back fix flat gauges, guide plate length,gauges between guide plate or reverse teeth guide flat and cylinder ＆ mote knife,mote knife angle,gauge between mote knife and cylinder,air flow were put forward. It is considered that guide plate length should be 25 mm to 35 ram,guide gauge should be 1.0 mm to 3.0 mm. Gauges between guide plate or reverse teeth guide flat and mote knife should be 5 mm to 10 mm.

关 键 词：梳棉机 棉网清洁器 导板 盖板 除尘刀 隔距 风量 

分 类 号：TS103.223[轻工技术与工程—纺织工程]