多脉冲增益调制三维实时成像系统  

Multi Pulse Gain-Modulated Three-Dimensional Imaging System

作　　者：王飞[1] 赵远[1] 张勇[1] 靳辰飞[1] 孙秀冬[1] 苏建忠[2] 吕华[2] 

机构地区：[1]哈尔滨工业大学物理系,黑龙江哈尔滨150001 [2]天津津航技术物理研究所,天津300192

出　　处：《中国激光》2010年第8期1961-1966,共6页Chinese Journal of Lasers

基　　金：总装预研基金(9140A01040307HT0125)资助课题

摘　　要：小型化是激光三维成像系统走向应用必须解决的重要问题之一。介绍了采用高重复频率小型激光器实现的小型化增益调制三维实时成像系统。利用多脉冲积累方式,使用单脉冲能量5μJ的激光器实现了与以前单脉冲能量10 mJ增益调制系统近似的作用距离和系统测距精度,同时系统的整体体积大大缩小。对系统的作用距离与测距精度进行了测试,结果表明,在当前条件下,室外能见度5 km时,系统可达到超过100 m的作用距离,室内测试获得的系统测距精度优于3 m。System size is of great concern when the laser ranging system is put into practical usage.A multi-pulse gain-modulated three-dimensional imaging system is presented,which uses low pulse energy laser as illumination source.By utilizing multi pulse accumulation method,a 5-μJ pulse laser source was used to achieve a detection range of 100 m with light fog and range accuracy greater than 3 m during indoor experiment.With the using of low pulse laser source the system size is greatly reduced.

关 键 词：成像系统 增益调制成像 多脉冲积累 激光成像 

分 类 号：O439[机械工程—光学工程]