纤维增强复合材料摩擦片的摩擦性能  

Tribological Properties of Fiber-Reinforced Composite

作　　者：郭新涛[1] 王海庆[2] 王成国[2] 庄光山[2] 

机构地区：[1]北京航空材料研究院,北京100095 [2]山东大学,山东济南250061

出　　处：《塑料》2010年第4期27-29,20,共4页Plastics

摘　　要：研究FB树脂、YSM树脂和ALPF树脂基复合材料摩擦片的摩擦性能,结果表明:FB树脂基摩擦片性能最优。FB树脂的最佳成型温度在170℃左右,此时摩擦片有较大的摩擦因数和较小的磨损率。提高摩擦片的密度可以增大摩擦因数,降低磨损率。Tribological properties of FB resin,YSM resin and ALPF resin matrix composites had been studied. The results indicated that FB resin matrix composite had the best performance. The favorable mold-temperature of FB resin was about 170℃ , at the condition,specimens had low special wear and relative high friction coefficient. Friction coefficient of specimens increased with the increasing of density, but the special wear decreased.

关 键 词：复合材料 成型温度 树脂 摩擦 磨损 

分 类 号：TQ323.1[化学工程—合成树脂塑料工业]