16Mn钢在空气和3.5% NaCl溶液中的疲劳行为  

Fatigue Behaviour of 16Mn Steel in Air and 3.5% NaCl Solution

作　　者：刘彦国[1,2] 孙先明[3] 马锦[2] 

机构地区：[1]浙江机电职业技术学院,杭州310053 [2]中国科学院金属研究所金属腐蚀与防护国家重点实验室,沈阳110016 [3]武汉材料保护研究所,武汉430030

出　　处：《理化检验（物理分册）》2010年第8期475-480,共6页Physical Testing and Chemical Analysis(Part A:Physical Testing)

基　　金：国家自然科学基金资助项目(50432020);浙江省自然科学基金资助项目(Y107428)

摘　　要：采用哑铃状平板试样,分别研究了16Mn钢在空气中和3.5%NaCl溶液中的疲劳行为,获得了S-N曲线,并对疲劳试样的表面和断口形貌进行了观察。结果表明:3.5%NaCl溶液(与空气相比)使16Mn钢的疲劳强度有较大程度的降低,在空气中16Mn钢的疲劳极限为200 MPa,而在3.5%NaCl溶液中该钢则不存在疲劳极限;空气中的疲劳试样只有一个萌生于试样表面基体的裂纹源,而3.5%NaCl溶液中该钢的疲劳试样一般有多个裂纹源,除了极少数萌生于试样表面基体处,其余均萌生于表面的点蚀坑;空气中疲劳试样裂纹扩展区的断口形貌以疲劳辉纹为主,而3.5%NaCl溶液中的则以沿晶开裂等脆性特征为主。此外还对空气中16Mn钢的疲劳极限进行了预测,预测值与试验值基本吻合。The fatigue behaviour of 16Mn steel in air and 3. 5% NaCl solution were studied by dumble-shaped plate type specimens. The S-N curves show that the fatigue strength of 16Mn steel in 3. 5% NaCl solution was much lower than that in air. The fatigue limit of it in air was 200 MPa, but there was no fatigue limit in 3.5% NaCl solution. Surface and fractography observation results show that the fatigue cracks in air were initiated from the matrix of surface, while most of fatigue cracks in 3. 5% NaCl solution were initiated from surface pits, except for some from the matrix of surface. The typical feature of the fatigue crack propagation region in air was fatigue striations, while that in 3. 5% NaCl solution was intergranular crack characteristic. It was found that the fatigue limit of 16Mn steel in air could be predicted by empirical equation, and the predicted fatigue limit was agreeable to the experimental fatigue limit.

关 键 词：疲劳行为 16MN钢 裂纹萌生 点蚀坑 裂纹扩展 疲劳极限预测 

分 类 号：TG174.1[金属学及工艺—金属表面处理] TG405[金属学及工艺—金属学]