印染废水的混凝处理效果研究  

Research on the Effects of Coagulation Treatment on Printing and Dyeing Wastewater

作　　者：高萌[1] 陈玉成[1,2] 谢倩[1] 夏琪[1] 

机构地区：[1]西南大学资源环境学院,重庆400716 [2]重庆市农业资源与环境重点实验室,重庆400716

出　　处：《西南大学学报（自然科学版）》2010年第7期88-92,共5页Journal of Southwest University(Natural Science Edition)

基　　金：西南大学博士基金资助项目(SWU109041)

摘　　要：利用混凝剂聚合硫酸铁(PFS)对某厂印染废水进行处理,考察了PFS单独使用及与聚丙烯酰胺(PAM)联合使用的效果,探讨了初始pH值、混凝剂投加量及温度对处理效果的影响.结果表明,PFS与PAM联合处理印染废水时效果较好,在常温常压下,初始pH值为9.5,PFS投加量为4 mL/L时,印染废水的化学需氧量(COD)和色度的去除率分别达91.8%和88.0%.The printing and dyeing wastewater of a factory was treated with the coagulant of polymerization iron sulfate（PFS） and the effects of PFS used alone or in combination with polyacrylamide（PAM） were studied.The effects of combined PFS-PAM treatment gave satisfactory results.A removal rate of 91.8% for COD and 88.0% for chroma was achieved when the original pH was 9.5 and PFS dosage was 4 mL/L under normal temperature and normal pressure.

关 键 词：聚合硫酸铁 印染废水 混凝 

分 类 号：X703[环境科学与工程—环境工程]