基于三角面元的涂层目标FDTD共形网格生成技术  

Conformal FDTD mesh-generating scheme for coated targets based on triangle-patch

作　　者：胡晓娟[1] 卢兆林[2] 葛德彪[3] 魏兵[3] 韩奎[1] 

机构地区：[1]中国矿业大学理学院,江苏徐州221116 [2]中国矿业大学计算机学院,江苏徐州221116 [3]西安电子科技大学理学院,陕西西安710071

出　　处：《系统工程与电子技术》2010年第9期1884-1888,共5页Systems Engineering and Electronics

基　　金：国家自然科学基金(60871071);中国矿业大学人才引进计划;中国矿业大学启航计划资助课题

摘　　要：提出了一种基于三角面元数据生成涂层目标时域有限差分(finite-difference time domain,FDTD)共形网格的方法。通过将原目标中各三角面元的顶点沿曲面在该点处的法线方向内移(内涂层)或外移(外涂层)所需的厚度,得到一组关于涂层的三角面元数据。其中曲面上各顶点处的法线方向近似等于包围该顶点的各三角面元的单位法向的矢量和。对于局部涂敷的情况,可根据需要只将涂敷部分所包含的三角面元顶点进行相应的移动,而其余顶点的位置保持不变。利用投影求交法,由原目标的三角面元数据和新生成的涂层三角面元数据即可得到共形FDTD计算所需要的共形网格参数。数值结果验证了方法的正确性和有效性。A conformal finite-difference time domain（FDTD） mesh-generating scheme for coated targets based on the triangle-patch is presented.For every vertex,the triangle-patches which have a common vertex should be figured out,and all the unit external normal vectors of these triangle-patches are directly summed up.The vector summation can be approximately seen as an external ＂average normal vector＂ of the common vertex.A data file about the coordinates of vertexes on coating can be got by removing the vertexes with a distance of coating thickness along their normal line,respectively.If a target is ＂internal coated＂,then vertexes should be removed along the positive direction of normal;else if it is ＂externally coated＂,then vertexes should be removed along the negative direction of normal.When a target is partially coated,only the vertexes on the coating part need to be removed,and the other vertexes remain unchanged.The triangle-patches data files about the original target and coating are used to generate FDTD conformal meshes for coated targets.The numerical results validate this scheme.

关 键 词：时域有限差分 三角面元 共形网格 涂层目标 局部涂敷 

分 类 号：TN011[电子电信—物理电子学]