精梳棉玉米纤维混纺提花方格织物的织造体会  

Experience of Weaving Combed Cotton Corn Fiber Blended Jacquard Check Fabric

作　　者：惠小龙 张震华 胡志刚 党美娟[2] 

机构地区：[1]陕西五环(集团)股份有限公司 [2]陕西省纺织科学研究所

出　　处：《棉纺织技术》2010年第9期64-65,共2页Cotton Textile Technology

摘　　要：探讨在SM92-380型剑杆织机上生产精梳棉玉米纤维混纺提花方格织物的工艺技术要点。针对织造过程中出现的跳纱、短纬、稀密路等疵点,通过分析提花方格织物的组织结构,采用中后梁,减少上下层经纱的张力差异,并合理设置上机张力,开口量适当偏小掌握,最终使织机效率达到85%以上,产品质量达到了预期的效果。Technology key points of producing combed cotton corn fiber blended jacquard check fabric on SM92- 380 rapier loom were discussed. According to group float, short weft and. motion mark et al,through analyzing jacquard check weave structure, middle back beam was adopted, tension difference of up and down warp was reduced. Loom tension was set rationally, shed size was controlled slightly less ,finally loom efficiency could reach above 85% and product quality could be better.

关 键 词：玉米纤维 混纺纱 提花织物 方格织物 跳纱 稀密路 

分 类 号：TS106.5[轻工技术与工程—纺织工程]