检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴长访[1] 何崇伟[2] 李荣光[1] 刘玲莉[1] 赵晋云[1] 王舰[3] 陈勇[4] 张振环[5] 朱范辉[5]
机构地区:[1]中国石油管道科技研究中心 [2]中国石油天然气管道局国内事业部 [3]中国石油管道公司 [4]中国石油管道公司沈阳输油气分公司 [5]中国石油管道公司秦皇岛输油气分公司
出 处:《油气储运》2010年第9期703-704,共2页Oil & Gas Storage and Transportation
摘 要:针对任丘首站管道阴极保护系统自投产运行以来,恒电位仪输出电流持续偏高的问题,对阴极保护电位和管道沿线防腐层性能进行了分析,评价结果显示:桩K001~桩K010管段防腐层性能发生一定程度的劣化,管道防腐层存在老化现象。通过PCM检测、阳极地床附近PCM试验和电位差计测量管中电流的方法,对管道阴极保护系统进行检测与评价,确定绝缘接头失效是任丘首站恒电位仪输出偏高的主要原因。Since the cathodic protection system in Renqiu Initial Pump Station has been put into operation,output current of potentiostat is continuously on the high side.In the light of this problem,analysis and evaluation on CP protective potential and coating performance along pipeline are carried out.Results show that the performance of coating in pipe sections at Stake K001~K010 is deteriorated,and the coating is aged.By means of PCM inspection,PCM experiment near anode groundbed and metering PCM with potentiometer,inspection and evaluation on PC system of the pipeline are made,and it is concluded that failure of insulating joint is the main cause of this problem.
关 键 词:长输管道 阴极保护 电位 电流 防腐层 性能 检测 评价
分 类 号:TE988[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.169