检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安热工研究院有限公司,陕西西安710032
出 处:《热力发电》2010年第9期27-29,34,共4页Thermal Power Generation
摘 要:以某1025t/h液态排渣锅炉为研究对象,对其下炉膛一维热流密度分布情况进行了计算,所得计算结果与下炉膛各段水冷壁吸热量吻合较好。计算表明,烟气温度、热流密度以及水冷壁的吸热热流密度的变化规律基本一致,随着煤粉颗粒的燃烧、热量的释放,烟气温度、热流密度以及水冷壁的吸热热流密度逐渐增加,但到达峰值后又呈下降趋势。Taking a 1 025 t/h boiler with wet bottom as an object to be studied,the one-dimentional heat flux density distribution situation in the lower furnace has been calculated,the result obtained from calculation tallies better with the absorbed heat of water-wall in each section of the lower furnace.The calculation shows that the regularity of variation for flue gas temperature,for heat flux density,as well as for heat flux density of water-wall absorbed heat are basically identical.Along with burning of pulverized coal particles and releasing of heat,the flue gas temperature,the heat flux density,and the heat flux density of water-wall absorbed heat are gradually increased,but the decreasing tendency appeared again after reaching the peak value,providing reference data for hydrodynamic calculation of the water-wall.
关 键 词:液态排渣 锅炉 炉膛 热流密度 分布特性 水动力计算
分 类 号:TK229[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13