Ku波段TM01模介质透镜加载天线  

Mode Dielectric Lens Loaded Antenna Working in Ku-band

作　　者：牟红兵[1] 罗勇[1] 刘亚军[1] 刘藤[1] 

机构地区：[1]电子科技大学物理电子学院,四川成都610054

出　　处：《现代电子技术》2010年第19期5-7,共3页Modern Electronics Technique

基　　金：国家自然科学基金资助项目(60671032)

摘　　要：随着高功率微波技术的发展,适用于辐射高功率轴对称模的天线备受关注。基于一般圆锥喇叭天线多用于TE11模的辐射,对TM01的辐射存在缺陷,针对高功率、小型化、较高增益以及最大辐射方向在天线轴向的要求,提出一种多扇区介质透镜天线,介质采用扇形台阶的形式加载在喇叭天线口径的前端,可以进行相位补偿,并使得天线的方向性变好。利用HFSS仿真软件分析表明,所设计的Ku波段的透镜天线具有较好的方向性和增益。The antennas that can directly radiate the azimuthally symmetric mode have been taken into account with the development of high-power microwave （HPM）. Because most of the ordinary conical-horns are used for the radiation of the mode, they exist many defects for the radiation of mode. In order to satisfy the requirement of an antenna that radiates a bore- sight peak （along the longitudinal axis of the source~ with high-gain beam, high-power capability and miniaturization, a dielec- tric lens antenna is proposed. The medium which adopts the form of sectors is loaded on the front-end of the conical-horn an- tenna. The dielectric lens can compensate the phase to impove the directivity of antennas. The analysis with HFSS software shows that the Ku-band dielectric lens antennas have a good directivity and high gain.

关 键 词：KU波段 高功率微波 TM01模 介质透镜 增益 

分 类 号：TN911-34[电子电信—通信与信息系统]