HDPE/EVOH高阻隔性材料的形态结构  

Morphological Structure of HDPE/EVOH Barrier Material

作　　者：陈永芬[1] 向明[1] 孙杨宣[1] 陈克强[1] 

机构地区：[1]四川大学高分子研究所

出　　处：《塑料工业》1999年第3期40-41,共2页China Plastics Industry

摘　　要：采用层状分散形态共混技术制备了ＨＤＰＥ／ＥＶＯＨ高阻隔性材料，研究了增容剂的制备及其用量对材料形态结构的影响。结果表明采用ＥＶＯＨ／相容剂和ＨＤＰＥ、ＥＶＯＨ制备的母粒能明显改变材料的流变性能，当采用ＥＶＯＨ／增容剂为４／１的阻隔母粒，所得材料的结构为大而均匀的片状形态，具有优异的阻隔性。所得材料应在较小的剪切速率下加工成型。HDPE/EVOH barrier material was prepared by means of layer dispersing blending.The effects of the preparation and content of compatibilizer on the morphological structure of the prepared material were studied.The results showed the masterbatch prepared from EVOH/compatibilizer,HDPE and EVOH/compatibilizer(4:1)was used as barrier masterbatch,the prepared material had an obvious and homogeneous toothlike structure,having good barrier property.The prepared material should be processed under small shearing rate so as to be favouralbe for the forming of obvious phase in EVOH.

关 键 词：高阻隔性材料 增容剂 结构 EVOH 聚乙烯 HDPE 

分 类 号：TQ325.12[化学工程—合成树脂塑料工业] O631.1[理学—高分子化学]