射流元件平面喷嘴结构优化试验研究  

Experimental Study on Plane Nozzle Structure Optimization in the Efflux Element

作　　者：熊青山[1,2] 李佳[1] 安传奇[1] 刘双亮[1] 

机构地区：[1]湖北省油气钻采工程重点实验室,湖北荆州434023 [2]长江大学石油工程学院,湖北荆州434023

出　　处：《凿岩机械气动工具》2010年第3期39-43,共5页Rock Drilling Machinery & Pneumatic Tools

摘　　要：液动式射流冲击器因其独特的优点,在石油、科学勘探等钻井中具有广泛的应用前景。其核心部件射流元件平面喷嘴结构好坏直接影响射流的能量利用率,因此在设计射流元件时,有必要设计出高效结构的喷嘴,以减少能量损失。本次试验中设计有"Y"形、椭圆形、双圆弧形、流线形、等变速形五种类型喷嘴,且在室内进行了试验。试验结果表明:流线形喷嘴的流量系数最大,而目前大量采用的"Y"形进口喷嘴流量系数几乎最小。建议在以后设计射流元件时采用流线形进口喷嘴,以使设计出的喷嘴能提高过流能力,从而提高冲击器的性能。the hydro-efflux hammer has good application potency in oil-drilling and scientific exploring for its unusual advantage. The plane nozzle structure of efflux element influences directly on efflux energy utilization, so it is necessary to develop the high effective plane structure nozzle to reduce the energy loss. Five types of nozzles included ＂Y＂, elliptical, double circular, streamlined and isovariable velocity type nozzle were designed and tested in the laboratory. The test results indicated that the coefficient of flow of streamlined nozzle is higher than any other nozzles. The coefficient of flow of ＂Y＂ type nozzle used widely is the lowest. During designing efflux dement later, the steamlined nozzle should be adopted to improve flow capacity of the nozzle and the performance of hydro-efflux hammer.

关 键 词：冲击旋转钻进 液动射流冲击器 射流元件 平面喷嘴 流量系数 

分 类 号：P634[天文地球—地质矿产勘探]