高矫顽力的低钕Nd_9(FeCoZrAl)_(85)B_6纳米晶合金的制备  

PREPARATION OF Nd9(FeCoZrAl)85B6 NANOCRYSTALLINE4/5] ALLOY WITH HIGH COERCIVE FORCE

作　　者：刘颖[1] 陈悦 涂铭旌[1] 王永强[2] 赵文金[3] 李聪[3] 彭倩[3] 李卫军[3] 

机构地区：[1]四川联合大学金属材料系 [2]中国西南应用磁学研究所 [3]中国核动力院核燃料及材料重点实验室

出　　处：《中国有色金属学报》1999年第2期259-262,共4页The Chinese Journal of Nonferrous Metals

基　　金：国家高性能核燃料及材料重点实验室资助

摘　　要：采用单辊快淬工艺制备了一种低钕含量Ｎｄ９（ＦｅＣｏＺｒＡｌ）８５Ｂ６纳米晶合金，研究了快淬工艺与热处理工艺对该合金纳米晶的形成及磁性的影响。结果表明快淬速度和热处理温度都明显地影响低钕含量Ｎｄ９（ＦｅＣｏＺｒＡｌ）８５Ｂ６纳米晶的形成及其磁性（内禀矫顽力ｊＨｃ，矫顽力ｂＨｃ，剩磁Ｂｒ和最大磁能积（ＢＨ）ｍ）。快淬速度２３ｍ／ｓ制备的非晶态合金，在６８５℃处理３０ｍｉｎ，可获得最佳的磁性，其粘结磁体的密度为６．０１ｇ／ｃｍ３时，Ｂｒ＝６５５ｍＴ，ｊＨｃ＝６３９．２ｋＡ／ｍ，ｂＨｃ＝３８１．６ｋＡ／ｍ，（ＢＨ）ｍ＝６５．６８ｋＪ／ｍ３。A Nd9(FeCoZrAl)85B6 nanostructured alloy has been prepared by melt spinning onto a copper roll, and the effect of the circumferential speed and the heat treatment process on its crystallizing and magnetic properties has been studied. The results showed that the speed and the heat treatment process influence obviously the crystallizing of Nd2Fe14B and Fe phase, the grain size and the magnetic properties of the alloy. Firstly, the magnetic properties increase with increasing the rapidly quenching speed, and then decrease. When the heat treatment temperature is raised, the magnetic properties increase, but the magnetic properties decrease with continuing to raise heat treatment temperature.The reasons are that the difference of the crystallizing and the grain size of Nd2Fe14B phase Fe results in the difference of the magnetic coupling effect between the Nd2Fe14B grains and the Nd2Fe14B grain and Fe grain. Thus, the nanocrystalline alloy has different magnetic properties. The alloy possesses optimum magnetic properties, and the magnetic properties of its epoxy resin bonded magnet are Br=655 mT, jHc=639.2 kA/m, bHc=381.6 *6]kA/m, (BH)m=65.68 kJ/m3.

关 键 词：纳米晶 矫顽力 热处理 磁性 稀土永磁 制备 

分 类 号：TM273.051[一般工业技术—材料科学与工程]