快速堵漏胶研制  

Development of Rapid Plugging Glue

作　　者：李冰[1] 宫晋英[1] 

机构地区：[1]太原工业学院化学与化工系,山西太原030008

出　　处：《天津化工》2010年第5期33-34,共2页Tianjin Chemical Industry

摘　　要：本试验以E-44型环氧树脂为基料,选择不同固化剂、促进剂、填料等,并进行各种组合及配比试验。所制备的快速堵漏胶,可在室温下于1min左右凝胶,在3min内达到初始固化。该堵漏胶具有较高的固化强度,适用于一般和紧急状态下金属及水泥管道、设备的堵漏。The present test was carried out by selecting different curing agent,accelerator,filler,etc.and combining them in different ratio,using E-44 type epoxy resin as base material.The rapid plugging glue prepared can gel in one minute or so and solidify basically in three minutes,at room temperature.The plugging glue has a higher curing intensity,and it is applied to the plugging of pipeline or equipment made from metal or cement,usually or urgently.

关 键 词：环氧树脂 固化 堵漏胶 

分 类 号：TQ436.6[化学工程]